THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE BODY ASSEMBLY


    1. Check that the throttle valve opens and closes smoothly.

    2. Check that the there is no sludge accumulating around the throttle body.

    3. A001FJVE10
      Component without harness connected
      *1 (Throttle Body)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the throttle body assembly.