MASS AIR FLOW METER INSTALLATION

PROCEDURE


  1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 1)


    1. A001AAN

      Install the mass air flow meter sub-assembly with the 2 screws.

      Torque:
      1.0 N*m  { 10 kgf*cm, 9 in.*lbf }

      Note


      • If the screw is tightened excessively, the screw hole may be damaged.

      • Make sure the O-ring is not pinched.

  2. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 2)


    1. A001A0N

      Install the mass air flow meter sub-assembly with the 2 screws.

      Torque:
      1.0 N*m  { 10 kgf*cm, 9 in.*lbf }

      Note


      • If the screw is tightened excessively, the screw hole may be damaged.

      • Make sure the O-ring is not pinched.

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY LH


    1. A001CWWE02
      *1 Hole

      Install the air cleaner cap sub-assembly LH to the air cleaner case with the 2 clips.

      Torque:
      for hose clamp
      3.8 N*m  { 39 kgf*cm, 34 in.*lbf }

      Tech Tips

      Insert the protrusion of the air cleaner hose into the hole of the hose clamp.

    2. Connect the mass air flow meter connector.

  4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY RH


    1. A001FJBE02
      *1 Hole

      Install the air cleaner cap sub-assembly RH to the air cleaner case with the 2 clips.

      Torque:
      for hose clamp
      3.8 N*m  { 39 kgf*cm, 34 in.*lbf }

      Tech Tips

      Insert the protrusion of the air cleaner hose into the hole of the hose clamp.

    2. Connect the mass air flow meter connector.

  5. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here