FUEL PUMP RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FUEL PUMP RELAY (F/PMP)

    A001DARE03

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 When no battery voltage is applied to terminals 1 and 2 Below 1 Ω
      3 - 4 When battery voltage is applied to terminals 1 and 2 10 kΩ or higher

      If the result is not as specified, replace the fuel pump relay.