CAUTION / NOTICE / HINT
Tech Tips
Inspect these items on a cooled down engine.
PROCEDURE
INSPECT DRIVE BELT
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE (for 2WD) | |
| 1UR-FSE (for AWD) |
REPLACE ENGINE OIL AND OIL FILTER
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE (for 2WD) | |
| 1UR-FSE (for AWD) |
INSPECT COOLING AND HEATER SYSTEM
Check that the radiator, condenser and/or intercooler are not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion etc.
INSPECT ENGINE COOLANT
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE |
REPLACE ENGINE COOLANT
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE |
INSPECT EXHAUST PIPES AND MOUNTINGS
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
REPLACE SPARK PLUGS
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE |
INSPECT BATTERY
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE |
REPLACE FUEL FILTER
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE |
ADD FUEL INJECTION SYSTEM
Add fuel injector cleaner to the fuel tank (Refer to the Service Bulletin for the fuel injection cleaner).
INSPECT AIR CLEANER FILTER
Remove the air cleaner filter.
Visually check that the air cleaner filter is not excessively damaged or oily.
Replace the air cleaner filter with a new one, if necessary.
INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND
Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.
INSPECT FUEL TANK CAP ASSEMBLY
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE |
INSPECT CHARCOAL CANISTER
| Type | See procedures |
|---|---|
| 1UR-FE | |
| 1UR-FSE |