REAR DRIVE SHAFT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR DRIVE SHAFT ASSEMBLY


    1. A001D5B

      Check that there is no excessive play in the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial directions of the inboard joint.

    4. Check the boots for damage.

    5. A001FRRE01

      Check that the 2 joint boots are not stretched or contracted when the drive shaft is at the standard length.

      Length (A)
      Item Length
      for LH Side 698.9 mm (2.29 ft.)
      for RH Side 744.9 mm (2.44 ft.)