TRANSFER ADAPTER OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE TRANSFER ASSEMBLY

    Click here

  2. REMOVE TRANSFER CASE ADAPTER REAR OIL SEAL


    1. Using a screwdriver, pry out the transfer case adapter rear oil seal.

      Note

      Do not damage the surface of the oil seal press fit hole or output shaft.

      Tech Tips

      Tape the screwdriver tip before use.

  3. INSTALL TRANSFER CASE ADAPTER REAR OIL SEAL


    1. Coat the lip of a new transfer case adapter rear oil seal with ATF.

    2. A001EPKE01

      Using SST and a hammer, tap in the transfer case adapter rear oil seal.

      SST
      09513-36040
      09502-12010
      Standard depth
      3.3 to 3.7 mm (0.13 to 0.15 in.)

  4. INSTALL TRANSFER ASSEMBLY

    Click here