COMBINATION SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD sides.

  • The procedure listed below is for the LHD sides.

PROCEDURE


  1. INSTALL COMBINATION SWITCH


    1. Attach the 4 claws to install the rear upper console panel sub-assembly.

    2. Connect the connector.

  2. INSTALL SHIFT POSITION INDICATOR

    Click here

  3. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 3 BOX PANEL

    Click here

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here