COMBINATION SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD sides.

  • The procedure listed below is for the LHD sides.

PROCEDURE


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  4. REMOVE NO. 3 BOX PANEL

    Click here

  5. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE SHIFT POSITION INDICATOR

    Click here

  7. REMOVE COMBINATION SWITCH


    1. Disconnect the connector.

    2. A001D1Q

      Detach the 4 claws and remove the combination switch from the rear upper console panel sub-assembly.