FLOOR SHIFT ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD sides.

  • The procedure listed below is for the LHD sides.

PROCEDURE


  1. REMOVE SHIFT POSITION INDICATOR

    A001BNX

    1. Remove the 2 screws and detach the 3 hooks. Then remove the shift position indicator from the rear upper console panel sub-assembly.

  2. REMOVE SHIFT LEVER BOOT COVER


    1. A001AEW

      Detach the 4 claws and remove the shift lever boot cover.

  3. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY


    1. A001FX1

      Detach the 4 claws and remove the shifting hole cover sub-assembly.

  4. REMOVE SHIFT LEVER CAP


    1. A001E3O

      Detach the 2 claws and remove the shift lever cap.

  5. REMOVE CONTROL POSITION INDICATOR PLATE


    1. A001FNO

      Remove the control position indicator plate.

  6. REMOVE SHIFT LOCK RELEASE BUTTON


    1. A001BX5

      Detach the claw and remove the shift lock release button.

  7. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


    1. A001FW0

      Disconnect the connector.

    2. Detach the connector clamp and remove the indicator light wire sub-assembly.