PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A001BONE01
    *1 Neutral Basic Line
    *2 Groove

    1. Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.

    2. Align the groove with the neutral basic line.

    3. Hold the switch in position and tighten the bolt.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

    4. After adjustment, perform the on-vehicle inspection Click here.