PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

    A001DA1

    1. Remove the nut and disconnect the floor shift gear shifting rod.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A001BUP

    1. Disconnect the switch connector.

    2. Remove the nut, spring washer and transmission control shaft lever.

    3. A001D5T

      Using a screwdriver, pry off the lock washer.

    4. A001FRB

      Remove the lock nut and lock washer.

    5. A0019N5

      Remove the bolt and park/neutral position switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.