TRANSMISSION WIRE INSPECTION

PROCEDURE


  1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)

    A001DL5E01
    *1 Component without harness connected: (Transmission Wire)
    *2 OIL

    1. Measure the resistance of the transmission wire.

      Standard resistance
      Tester Connection ATF Temperature Specified Condition
      8 (OIL) - 9 (E2) 10°C (50°F) 5.8 to 7.1 kΩ
      8 (OIL) - 9 (E2) 25°C (77°F) 2.5 to 4.5 kΩ
      8 (OIL) - 9 (E2) 110°C (230°F) 231 to 263 Ω

      Tech Tips

      If the resistance is not within the specified range of any of the ATF temperatures shown in the table above, the driveability of the vehicle may decrease.