DIFFERENTIAL CARRIER ASSEMBLY(for LSD) REMOVAL

PROCEDURE


  1. REMOVE REAR WHEELS

  2. DRAIN DIFFERENTIAL OIL

    Click here

  3. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  4. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

    Click here

  5. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  6. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY


    1. Support the rear differential carrier assembly with a transmission jack.

      CAUTION:


      • As the rear differential carrier assembly is very heavy, securely support it with the transmission jack.

      • Perform this procedure with several people supporting the rear differential carrier assembly so that it does not tilt or fall.

    2. A001D5ZE02

      Using SST or a 12 mm socket hexagon wrench, remove the 3 bolts (A) from the rear No. 1 and No. 2 differential mount cushions.

      SST
      09961-00950

    3. Remove the 2 bolts (B).

    4. Slowly lower the transmission jack. Then remove the upper and lower rear differential mount stoppers, and rear differential carrier assembly from the rear suspension member.

      Note


      • Do not drop the rear differential carrier assembly.

      • When removing the rear differential carrier assembly, do not damage the installation surface.