STARTER CUT RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT STARTER CUT RELAY (ST CUT/IGCT2)


    1. A001COLE03

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the starter cut relay.