ENTRY AND START SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE ENTRY AND START SYSTEM

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current setting before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Customizing with intelligent tester

      
      

      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting.

      5. Select the setting by referring to the table below.

         Entry&Start

         Display (Item)	Default	Content	Setting	Relevant ECU
         Ignition Available Area	All	Function to permit opening luggage compartment door	Front or All	Certification ECU

   2. Customizing with the Multi-display

      
      

      1. Turn the engine switch on (IG).

      2. Enter the following menus: SET UP / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

         Door Lock Settings

         Display	Default	Content	Setting	Relevant ECU
         Entry and start system	On	Function that enables or disables the entry and start system.	On or Off	Certification ECU