OIL LEVEL SENSOR INSPECTION

PROCEDURE


  1. INSPECT ENGINE OIL LEVEL SENSOR


    1. Partially immerse the sensor in an oil bath and warm up the oil bath

    2. A001CTDE11
      *a ON
      *b OFF

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 ON, 20°C (68°F) Below 1 Ω
      OFF, 20°C (68°F) Below 1 Ω
      ON, 60°C (140°F) Below 1 Ω
      OFF, 60°C (140°F) 10 kΩ or higher

      If the result is not as specified, replace the engine oil level sensor.