OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  3. REMOVE FRONT SUSPENSION MEMBER PROTECTOR LOWER

    Click here

  4. DRAIN ENGINE OIL

    Click here

  5. DISCONNECT OIL COOLER TUBE


    1. A001BQJ

      Remove the 2 bolts and 2 clamps to disconnect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube.

  6. REMOVE CRANK POSITION SENSOR BRACKET


    1. A0019JB

      Using a clip remover, disconnect the harness clamp.

    2. Remove the bolt and crank position sensor bracket.

  7. REMOVE ENGINE OIL LEVEL SENSOR


    1. A001927

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts.

    3. A001FHA

      Rotate the engine oil level sensor 180° and remove it.

    4. A001F9BE08
      *1 Cutting Position
      *2 Supply Part

      Cut off the gasket as shown in the illustration.

    5. Remove the gasket from the oil level sensor.

      Tech Tips

      After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.