OIL LEVEL SENSOR(for AWD) INSPECTION

PROCEDURE


  1. INSPECT ENGINE OIL LEVEL SENSOR


    1. Partially immerse the sensor in an oil bath and warm up the oil bath.

    2. A001BXAE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 ON, 20°C (68°F) Below 1 Ω
      OFF, 20°C (68°F) Below 1 Ω
      ON, 60°C (140°F) Below 1 Ω
      OFF, 60°C (140°F) 10 kΩ or higher

      If the result is not as specified, replace the engine oil level sensor.