OIL LEVEL SENSOR(for AWD) REMOVAL

PROCEDURE


  1. REMOVE FRONT CENTER FLOOR COVER

    Click here

  2. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  5. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  6. REMOVE FRONT SUSPENSION MEMBER PROTECTOR LOWER

    Click here

  7. DRAIN ENGINE OIL

    Click here

  8. REMOVE ENGINE OIL LEVEL SENSOR


    1. A001CDZ

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts.

    3. A0019GF

      Rotate the engine oil level sensor 180° and remove it.

    4. A001F9BE08
      *1 Cutting Position
      *2 Supply Part

      Cut off the gasket as shown in the illustration.

    5. Remove the gasket from the oil level sensor.

      Tech Tips

      After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.