THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT


    1. Install a new gasket and the water inlet with thermostat with the 3 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. CONNECT NO. 2 RADIATOR HOSE


    1. A001EVSE04
      Text in Illustration
      *a Front
      *b LH Side

      Connect the No. 2 radiator hose to the water inlet sub-assembly.

      Tech Tips

      The direction of the hose clamp is indicated in the illustration.

  3. INSTALL RADIATOR RESERVOIR ASSEMBLY


    1. Install the radiator reservoir assembly with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
    2. A001A7BE03
      Text in Illustration
      *a Upper

      Connect the 2 reservoir hoses.

      Tech Tips

      The direction of the hose clamp is indicated in the illustration.

  4. ADD ENGINE COOLANT

    Click here

  5. INSTALL NO. 1 AIR CLEANER INLET

    Click here

  6. INSPECT FOR COOLANT LEAK

    Click here

  7. INSTALL ENGINE ROOM SIDE COVER RH

    Click here

  8. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  9. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  10. INSTALL NO. 1 ENGINE UNDER COVER

    Click here