EXHAUST MANIFOLD(for AWD) REMOVAL

PROCEDURE


  1. REMOVE ENGINE AND TRANSMISSION

    Click here

  2. REMOVE FRONT FRAME ASSEMBLY

    Click here

  3. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A001B1O

      Remove the 3 bolts and heat insulator.

  5. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A001A5V

      Remove the 3 bolts and heat insulator.

  6. REMOVE FRONT ENGINE MOUNTING INSULATOR

    Click here

  7. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

    Click here

  8. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

    Click here

  9. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A001B1D

      Disconnect the air fuel ratio sensor connector.

    2. A001CPA

      Remove the 8 nuts and exhaust manifold RH.

    3. Remove the gasket.

  10. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A001FK6

      Disconnect the air fuel ratio sensor connector.

    2. A001CWZ

      Remove the 8 nuts and exhaust manifold LH.

    3. Remove the gasket.

  11. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


    1. A001EB0E01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.

      SST
      09224-00010

  12. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)


    1. A001DMWE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.

      SST
      09224-00010