INTAKE AIR CONTROL VALVE ACTUATOR INSTALLATION

PROCEDURE


  1. INSTALL INTAKE AIR CONTROL VALVE ACTUATOR

    A0019TC

    1. Temporarily install the actuator rod to the intake air control valve actuator.

    2. Install the intake air control valve actuator to the intake manifold with the 2 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    3. Install the actuator rod to the intake air control valve actuator with the nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      When tightening the nut, hold the actuator rod in place so that it does not move.

    4. Connect the intake air control valve connector.

  2. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here