INTAKE SYSTEM ON-VEHICLE INSPECTION

PROCEDURE


  1. CHECK INTAKE AIR CONTROL FUNCTION


    1. Connect the intelligent tester or Techstream to the DLC3.

    2. Turn the engine switch ON (IG).

    3. Push the intelligent tester or Techstream main switch on.

    4. Enter the following menus: Powertrain / Engine / Active test / Activate the VSV for Intake Control.

    5. A0019HO

      When power is supplied, check that the actuator rod operates.

  2. INSPECT AIR CLEANER FILTER ELEMENT


    1. Check that the air cleaner filter elements are not excessively dirty.

      If the air cleaner filter elements are excessively dirty, replace both of them at the same time.

    2. A001CQD

      If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.

      Clean both air cleaner filter elements at the same time.