CYLINDER BLOCK REPLACEMENT

PROCEDURE


  1. REPLACE STRAIGHT PIN

    Note

    It is not necessary to remove the straight pin unless it is being replaced.


    1. Remove the straight pins.

    2. Using a plastic-faced hammer, tap in new straight pins to the cylinder block.

      A001EXQE04
      Standard protrusion
      Item Specified Condition
      Pin A 23 mm (0.9055 in.)
      Pin B 11 mm (0.4331 in.)
      Pin C 9 mm (0.3543 in.)
      Pin D 6 mm (0.2362 in.)