REAR CRANKSHAFT OIL SEAL(for 2WD) REPLACEMENT

PROCEDURE


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Click here

  3. REMOVE ENGINE REAR OIL SEAL


    1. A001F63

      Remove the engine rear oil seal with a screwdriver.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the engine rear oil seal press fit hole and crankshaft.

  4. INSTALL ENGINE REAR OIL SEAL


    1. A0019D4E01

      Using SST, tap in a new engine rear oil seal until its surface is flush with the oil seal retainer edge.

      SST
      09223-15030
      09950-70010   ( 09951-07150 )

      Note


      • Keep the lip free from foreign matter.

      • Do not tap on the engine rear oil seal at an angle.

  5. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Click here

  6. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY

    Click here