DRIVE BELT INSTALLATION

PROCEDURE


  1. INSTALL V-RIBBED BELT


    1. A001CKVE05

      Install the V-ribbed belt as shown in the illustration.

      Note

      Check that the V-ribbed belt is properly set to each pulley.


      1. Rotate the tensioner pulley counterclockwise, and then remove the fix bar.

  2. INSTALL INTAKE AIR CONNECTOR PIPE

    Click here

  3. INSTALL NO. 1 AIR CLEANER INLET

    Click here

  4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  5. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here