ENGINE(for 2WD) INSPECTION

PROCEDURE


  1. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 1)


    1. A001DPM

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.

      Maximum warpage
      0.7 mm (0.0276 in.)

      If the warpage is more than the maximum, replace the exhaust manifold sub-assembly.

  2. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 2)


    1. A001CEW

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.

      Maximum warpage
      0.7 mm (0.0276 in.)

      If the warpage is more than the maximum, replace the exhaust manifold sub-assembly.