FLOOR SHIFT ASSEMBLY ADJUSTMENT

PROCEDURE


  1. ADJUST SHIFT LEVER POSITION

    A001A7T

    1. Remove the nut and disconnect the shifting rod.

    2. A001FDJE01

      Turn the control shaft lever RH of the park/neutral position switch counterclockwise until it stops, and turn it clockwise 2 notches to set it to N.

    3. Move the shift lever to N and tighten the nut while lightly pushing the shift lever toward R.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

      Note

      Do not push the shift lever too hard.

    4. Check that the shift lever moves smoothly and the shift lever and gear operate correctly.