ЖГУТ ЭЛЕКТРОПРОВОДКИ ТРАНСМИССИИ СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE TRANSMISSION OIL LEVEL GAUGE SUB-ASSEMBLY


    1. A003C4Y

      Remove the transmission oil level gauge.

  3. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. A003AXXE01

      Remove the drain plug, gasket and drain the ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      20 N*m  { 205 kgf*cm, 15 ft.*lbf }
  4. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY


    1. A003D9DE01

      Remove the 2 bolts and transmission oil filler tube.

    2. Remove the O-ring from the oil filler tube.

  5. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY


    1. A003H9X

      Uniformly loosen the 19 bolts and remove the transmission oil pan sub-assembly.

    2. A003HYZ

      Install the blade of a oil pan seal cutter between the transmission case and oil pan, cut off applied sealer and remove the oil pan.

      Note

      When removing the oil pan, be careful not to damage the oil pan flange.

    3. A003HRJE02

      Remove the 3 magnets from the oil pan.

    4. Examine particles in the pan.


      1. A003F8I

        Collect any steel chips with the removed magnets. Carefully look at the foreign objects and particles in the pan and on the magnets to guess at the type of wear which might be found in the transmission. Steel (magnetic)... bearing, gear and clutch plate wear. Brass (non-magnetic)... bushing wear

  6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. A003AUNE01

      Remove the 4 bolts and oil strainer.

      Note

      Be careful as some fluid will come out of the oil strainer.

    2. Remove the 3 gaskets from the oil strainer.

  7. DISCONNECT TRANSMISSION WIRE


    1. w/o Flex Lock-up:

      Disconnect the 4 connectors.

      A003CZ3E01
      Text in Illustration
      *A w/ Flex Lock-up *B w/o Flex Lock-up
      *1 ATF Temperature Sensor - -
    2. w/ Flex Lock-up:


      1. Disconnect the 4 connectors.

      2. Detach the ATF temperature sensor from the temperature sensor clamp.

  8. REMOVE TRANSMISSION WIRE


    1. A003GMB

      Remove the bolt and pull out the transmission wire.

    2. A003EXHE01

      Remove the O-ring from the transmission wire.