ДАТЧИК ПОЛОЖЕНИЯ ПАРКИНГА / НЕЙТРАЛИ СНЯТИЕ


  1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A003FCK

      Disconnect the connector.

    2. A003ERDE01

      Using a screwdriver, bend the tabs of the lock washer.

      Note

      Be careful not to damage the park/neutral position switch assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Remove the nut and lock washer.

    4. Remove the bolt and park/neutral position switch assembly.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.