Click here

СВЕЧА НАКАЛИВАНИЯ СНЯТИЕ

Click here
Click here
CAUTION:

Make sure to wear protective gloves when performing work to avoid burns.

Click here
  1. Click here

    WARM UP ENGINE

    Note:

    To protect the glow plug assembly from damage, before removing the glow plug assembly, make sure to warm up the engine.

  2. Click here

    REMOVE COMMON RAIL ASSEMBLY

    (Click here)

  3. Click here

    REMOVE NO. 1 GLOW PLUG CONNECTOR

    CAUTION:

    Make sure to wear protective gloves when performing work to avoid burns.


    1. A003E7M

      Using an E8 "TORX" socket wrench, remove the stud bolt from the intake manifold.

    2. A003B9I

      Remove the 4 glow plug screw grommets.

    3. A003HUJ

      Remove the 4 nuts and No. 1 glow plug connector.

  4. Click here

    REMOVE GLOW PLUG ASSEMBLY

    CAUTION:

    Make sure to wear protective gloves when performing work to avoid burns.


    1. A003D9K

      Using a 10 mm deep socket wrench, remove the 4 glow plug assemblies.