КОНТРОЛЛЕР СВЕЧЕЙ НАКАЛИВАНИЯ УСТАНОВКА


  1. INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET


    1. Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET


    1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL GLOW PLUG CONTROLLER


    1. Install the glow plug controller with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 4 connectors.

  4. INSTALL BATTERY SERVICE HOLE COVER

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.