МАСЛЯНЫЙ ФИЛЬТР СНЯТИЕ

Note


  • Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

  • Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Protective clothing and gloves that cannot be penetrated by oil should be worn. The skin should be washed with soap and water, or use waterless hand cleaner, to remove any used engine oil thoroughly. Do not use gasoline, thinners or solvents.

  • In order to protect the environment, used oil and used oil filters must be disposed of at designated disposal sites.


  1. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

      Note

      Collect the oil in a disposable oil container.

    3. Clean the oil pan drain plug and install it with a new gasket.

      Torque:
      38 N*m  { 382 kgf*cm, 28 ft.*lbf }

  2. REMOVE OIL FILTER ELEMENT


    1. A003H42E12
      Text in Illustration
      *a Oil Filter Drain Pipe
      *b Hose

      Connect a hose with an inside diameter of 15 mm (0.591 in.) to the oil filter drain pipe.

    2. A003CA1

      Remove the oil filter drain plug.

    3. Remove the O-ring from the oil filter drain plug and install it to an oil filter drain pipe.

    4. A003DG4E01
      Text in Illustration
      *1 Oil Filter Cap
      *2 O-Ring
      *a Oil Filter Drain Pipe

      Install the oil filter drain pipe to the oil filter cap and drain the engine oil.

    5. Remove the oil filter drain pipe.

    6. Apply a light coat of engine oil to a new O-ring and install it to the oil filter drain plug.

    7. Install the oil filter drain plug to the oil filter cap.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }
    8. A003DZVE01

      Using SST, remove the oil filter cap.

      SST
      09228-06501
    9. A003GVSE01
      Text in Illustration
      *1 Oil Filter Element
      *2 Oil Filter Cap
      *3 O-Ring

      Remove the oil filter element and O-ring from the oil filter cap.