Click here

РАДИАТОР СНЯТИЕ

Click here
Click here
  1. Click here

    REMOVE CONDENSER WITH RECEIVER ASSEMBLY

    (Click here)

  2. Click here

    DRAIN ENGINE COOLANT

    CAUTION:

    Do not remove the radiator reservoir cap sub-assembly while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

    Tip:

    Collect the engine coolant in a container and dispose of it according to the local regulations.


    1. A003BS1E01

      Loosen the radiator drain cock plug and drain the engine coolant.

      Table 1. Text in Illustration
      *1 Radiator Reservoir Cap Sub-assembly *2 Radiator Reservoir Assembly
      *3 Radiator Drain Cock Plug *4 Cylinder Block Water Drain Cock Plug
      *5 2-Way - -

    2. Remove the radiator reservoir cap sub-assembly.

    3. Loosen the cylinder block water drain cock plug and drain the engine coolant from the engine.

  3. Click here

    REMOVE UPPER RADIATOR SUPPORT SEAL


    1. A003GBB

      Remove the 2 clips, 4 bolts and upper radiator support seal.

  4. Click here

    REMOVE RADIATOR RESERVOIR ASSEMBLY


    1. A003E3S

      Slide the hose clamp and disconnect the water by-pass hose from the radiator reservoir assembly.

    2. Slide the hose clamp and disconnect the No. 2 water by-pass hose from the radiator reservoir assembly.

    3. Remove the bolt and radiator reservoir assembly.

  5. Click here

    REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A003HAF

      Disconnect the connector from the windshield washer motor and pump assembly.

    2. Remove the 2 bolts and windshield washer motor and pump assembly.

    3. A003C6KE01

      Detach the hose clamp.

      Table 2. Text in Illustration
      *A w/ Rear Wiper *B w/o Rear Wiper

    4. w/ Rear Wiper:

      Disconnect the 2 connectors and 2 washer hoses.

    5. w/o Rear Wiper:

      Disconnect the connector and washer hose.

  6. Click here

    REMOVE HOOD LOCK ASSEMBLY


    1. A003E6M

      Remove the 3 bolts and disconnect the hood lock assembly.

    2. Remove the hood lock assembly from the hood lock control cable assembly.

  7. Click here

    REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY


    1. Slide the hose clamp and disconnect the water by-pass hose from the radiator assembly.

    2. A003DBD

      Detach the 2 clamps to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.

    3. Remove the 6 bolts and upper radiator support sub-assembly.

  8. Click here

    REMOVE FAN BRACKET ASSEMBLY


    1. Disconnect the 4 connectors from the No. 1 and No. 2 cooling fan ECUs.

    2. A003FG0

      Remove the 2 bolts, 2 nuts, and fan bracket assembly together with the No. 1 and No. 2 cooling fan ECUs.

  9. Click here

    DISCONNECT OIL COOLER HOSE


    1. A003DBYE03

      Detach the 2 oil cooler hose clamps.

    2. Slide the hose clamp and disconnect the inlet oil cooler hose from the oil cooler tube.

    3. Slide the hose clamp and disconnect the outlet oil cooler hose from the oil cooler tube.

  10. Click here

    DISCONNECT NO. 2 RADIATOR HOSE


    1. Slide the hose clamp and disconnect the No. 2 radiator hose from the radiator assembly.

  11. Click here

    DISCONNECT NO. 3 RADIATOR HOSE


    1. Slide the hose clamp and disconnect the No. 3 radiator hose from the radiator assembly.

  12. Click here

    REMOVE FAN SHROUD


    1. A003CKS

      Remove the 6 bolts and fan shroud from the underside of the vehicle.

  13. Click here

    REMOVE NO. 2 FAN SHROUD


    1. A003EIL

      Slide the hose clamp and remove the No. 2 water by-pass hose from the water by-pass pipe sub-assembly.

    2. Remove the bolt to disconnect the water by-pass pipe sub-assembly from the radiator assembly.

      Tip:

      This procedure is performed because the bolt of the water by-pass pipe sub-assembly interferes with the removal of the No. 2 fan shroud.

    3. A003FII

      Remove the 2 bolts and No. 2 fan shroud from the underside of the vehicle.

      Note:

      Do not damage the radiator assembly when removing the No. 2 fan shroud.

  14. Click here

    REMOVE RADIATOR ASSEMBLY


    1. A003G2B

      Remove the radiator assembly from the vehicle.

      Note:

      Do not drop the radiator assembly.

    2. Remove the 4 grommets from the radiator assembly.

  15. Click here

    REMOVE OIL COOLER HOSE


    1. A003C33

      Slide the hose clamp and remove the inlet oil cooler hose from the radiator assembly.

    2. Slide the hose clamp and remove the outlet oil cooler hose from the radiator assembly.

  16. Click here

    REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY


    1. A003H8R

      Slide the hose clamp and remove the water by-pass pipe sub-assembly from the radiator assembly.