Click here

РАСШИРИТЕЛЬНЫЙ БАЧОК МОЧЕВИНЫ ЗАПОЛНЕНИЕ

Click here
Click here Click here
Note:

  • Only refill with urea solution (AdBlue) (compliant with ISO 22241-1).

  • Take care when refilling urea solution (AdBlue) without using SST, as urea solution (AdBlue) may overflow from the refill port.

  • If urea solution (AdBlue) comes into contact with any painted surfaces on the vehicle, immediately wash the affected areas with water.

  • If urea solution (AdBlue) is spilled inside the engine compartment, immediately wipe it with a wet cloth.

Click here
  1. Click here

    REFILL UREA SOLUTION (AdBlue)


    1. Remove the urea tank cap assembly.

    2. A003AW0E01

      Set SST to the urea tank filler pipe assembly and refill the urea solution (AdBlue).

      09998-60010
      Tip:

      For instructions on how to use SST, refer to its instruction manual.

    3. Remove SST from the urea tank filler pipe assembly.

      Note:

      • If urea solution (AdBlue) comes into contact with any painted surfaces on the vehicle, immediately wash the affected areas with water.

      • If urea solution (AdBlue) is spilled inside the engine compartment, immediately wipe it with a wet cloth.

    4. Install the urea tank cap assembly.