ПЕРЕПУСКНОЙ РАСПРЕДЕЛИТЕЛЬНЫЙ КЛАПАН РОГ СНЯТИЕ


  1. REMOVE VACUUM CONTROL VALVE SET


    1. Disconnect the connector from the vacuum control valve set.

    2. A003HOH

      Disconnect the 2 vacuum hoses from the vacuum control valve set and No. 2 EGR valve assembly.

    3. A003EZH

      Remove the 2 bolts and vacuum control valve set from the intake manifold.

  2. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY


    1. A003CSG

      Disconnect the vacuum hose from the No. 1 vacuum switching valve assembly.

    2. A003C4U

      Remove the screw and No. 1 vacuum switching valve assembly from the bracket.