Click here

ТОПЛИВНЫЙ НАСОС РАЗБОРКА

Click here
Click here
Note:

Do not try to remove the nylon tube as it is welded to the fuel suction with pump and gauge tube assembly (Click here).

Click here
  1. Click here

    REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A003DYWE01

      Disconnect the fuel pump harness connector and fuel sender gauge connector.

    2. A003GZ2E01

      Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge assembly upward to remove it.

      Table 1. Text in Illustration
      A003DCD Press down
      A003GWQ Slide
  2. Click here

    REMOVE NO. 1 FUEL SUB-TANK


    1. A003BHWE01

      Disconnect the jet pump from the No. 1 fuel sub-tank.

      Table 2. Text in Illustration
      *1 Jet Pump

    2. Detach the claw and 2 clamps from the No. 1 fuel sub-tank.

      Note:

      Do not damage the No. 1 fuel sub-tank.

    3. A003BXJ

      Using a screwdriver with its tip wrapped in protective tape, detach the 5 claws to remove the No. 1 fuel sub-tank.

      Note:

      Do not damage the No. 1 fuel sub-tank.

  3. Click here

    REMOVE FUEL PUMP


    1. A003AO6

      Using a screwdriver with its tip wrapped in protective tape, detach the 5 claws to remove the fuel pump from the fuel filter assembly.

      Note:

      Do not damage the fuel filter assembly.

    2. Disconnect the fuel pump harness connector from the fuel pump.

    3. Remove the O-ring from the fuel filter assembly.

    4. Remove the fuel pump spacer from the fuel pump.