Click here

ТОПЛИВНАЯ ФОРСУНКА СНЯТИЕ

Click here
Click here Click here
  1. Click here

    REMOVE FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)

    Tip:

    Порядок выполнения работ такой же, как для левой стороны. (см. стр.Click here)

  2. Click here

    REMOVE FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)

    Tip:

    Порядок выполнения работ такой же, как для левой стороны. (см. стр.Click here)

  3. Click here

    REMOVE FRONT DOOR SCUFF PLATE RH

  4. Click here

    REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY


    1. Заверните коврик и снимите крышку технологического отверстия двигателя.

  5. Click here

    SEPARATE AIR CLEANER HOSE NO.2


    1. Loosen the bolt, and disconnect the air cleaner hose No.2.

  6. Click here

    REMOVE INTAKE AIR CONNECTOR SUB-ASSEMBLY


    1. Disconnect the ventilation hose.

    2. Disconnect the turbo pressure sensor connector.

    3. A003FXV

      Remove the bolt, 3 nuts, intake air connector and gasket.

  7. Click here

    REMOVE INTAKE AIR CONNECTOR BRACKET


    1. A003AY3

      Выверните 2 болта и снимите кронштейн соединителя впуска воздуха.

  8. Click here

    REMOVE VENTURI ASSEMBLY


    1. A003I6AE01

      Disconnect the throttle open switch connector.

    2. A003G5UE01

      Disconnect the throttle control motor connector.

    3. Remove the venturi and gasket.

  9. Click here

    REMOVE INJECTION PIPE SET


    1. Loosen the 8 union nuts of the 4 injection pipes.

    2. Remove the 2 nuts, 2 upper pipe clamps, and 4 injection pipes with lower pipe clamps.

  10. Click here

    REMOVE GLOW PLUG NO.1 CONNECTOR


    1. Remove the vehicle's side wire harness, glow plug screw grommets and nuts, and disconnect the glow plug No.1 connector.

  11. Click here

    REMOVE NOZZLE LEAKAGE PIPE ASSEMBLY


    1. Disconnect the fuel hose from the leakage pipe.

    2. Remove the 4 nuts, leakage pipe and the 4 ring packing washers.

  12. Click here

    REMOVE NOZZLE HOLDER AND NOZZLE SET


    1. Using SST, remove the 4 injection nozzles, 4 injection nozzle seats and 4 injection nozzle seat gaskets.

      09268-64010 09268-64020