ЗАДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА СНЯТИЕ


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A003CAFE01

      Using SST, hold the crankshaft.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
    2. A003BYKE01

      Remove the 10 bolts, rear drive plate spacer, drive plate and ring gear sub-assembly and front drive plate spacer.

  3. REMOVE REAR CRANKSHAFT OIL SEAL


    1. A003B8GE03
      Text in Illustration
      *a Protective Tape
      *b Cut Position

      Using a knife, cut through the rear crankshaft oil seal lip.

    2. Using a screwdriver with its tip taped, pry out the rear crankshaft oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.