ПЕРЕДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА УСТАНОВКА


  1. INSTALL FRONT CRANKSHAFT OIL SEAL


    1. Apply MP grease to the lip of a new crankshaft oil seal.

      Note


      • Keep the lip free of foreign objects.

      • Do not allow MP grease to contact the dust seal.

    2. A003I9QE01
      Text in Illustration
      *1 Front Crankshaft Oil Seal
      *2 Timing Chain Cover Assembly
      *a 0 to 1.5 mm (0 to 0.0591 in.)

      Using SST and a hammer, tap in the front crankshaft oil seal.

      SST
      09214-76011

      Note


      • The acceptable depth from the top of the timing chain cover assembly is 0 to 1.5 mm (0 to 0.0591 in.)

      • Keep the lip free from foreign matter.

      • Do not tap the front crankshaft oil seal at an angle.

      • Make sure that the front crankshaft oil seal is properly installed.

  2. INSTALL CRANKSHAFT PULLEY


    1. Align the keyway of the crankshaft pulley with the key located on the crankshaft, and then slide the crankshaft pulley into place to install it.

    2. A003F3SE01

      Using SST, install a new pulley bolt.

      SST
      09213-58014   ( 91551-80840 )
      09330-00021
      Torque:
      365 N*m  { 3722 kgf*cm, 269 ft.*lbf }

  3. INSTALL CRANKSHAFT PULLEY COVER


    1. Install the crankshaft pulley cover to the crankshaft pulley with the 4 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  4. INSTALL FAN AND GENERATOR V BELT

    Click here