Click here

ECM УСТАНОВКА

Click here
Click here
  1. Click here

    INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket with the 2 screws.

      3.0 N*m 31 kgf*cm 27 in.*lbf
  2. Click here

    INSTALL NO. 1 ECM BRACKET


    1. Install the No. 1 ECM bracket with the 3 screws.

      3.0 N*m 31 kgf*cm 27 in.*lbf
  3. Click here

    INSTALL ECM


    1. A003DVX

      Install the ECM, connect the 2 ECM connectors and lower the 2 levers.

      Note:

      • When connecting the ECM connector, make sure that dirt, water and other foreign matter is not stuck between the ECM connector and ECM.

      • Make sure that the 2 levers are securely lowered.

    2. Attach the 2 wire harness clamps to the No. 1 ECM bracket and No. 2 ECM bracket.

    3. Install the 3 bolts to the ECM.

      5.5 N*m 56 kgf*cm 49 in.*lbf
      Note:

      Do not use an ECM that has been dropped or subjected to a strong impact.

    4. Return the floor carpet to its original position.

  4. Click here

    INSTALL FRONT SEAT ASSEMBLY RH

    (Click here)

  5. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  7. Click here

    INSTALL BATTERY SERVICE HOLE COVER