ГИДРАВЛИЧЕСКИЙ КЛАПАН ИЗМЕНЕНИЯ ФАЗ УСТАНОВКА

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

1. 

   for Intake Side:

   
   

   1. Apply a light coat of engine oil to the a new O-ring, and install it to the camshaft timing oil control valve assembly.

      Note:

      Do not damage the O-ring when installing.

      Tip:

      An O-ring is already installed in a new camshaft timing oil control valve assembly. So, the O-ring only needs to be coated with engine oil when the assembly is replaced with a new one.

   2. Install the camshaft timing oil control valve assembly to the cylinder head sub-assembly with the bolt.

      9.0 N*m

      92 kgf*cm

      80 in.*lbf

      Note:
      

      • Replace with a new part if it is dropped or if it receives a strong impact.

      • Make sure that the O-ring is not cracked or jammed when installing.

   3. Connect the camshaft timing oil control valve connector.

2. for Exhaust Side:

   
   

   1. Apply a light coat of engine oil to the a new O-ring, and install it to the camshaft timing oil control valve assembly.

      Note:

      Do not damage the O-ring when installing.

      Tip:

      An O-ring is already installed in a new camshaft timing oil control valve assembly. So, the O-ring only needs to be coated with engine oil when the assembly is replaced with a new one.

   2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

      9.0 N*m

      92 kgf*cm

      80 in.*lbf

      Note:
      

      • Replace with a new part if it is dropped or if it receives a strong impact.

      • Make sure that the O-ring is not cracked or jammed when installing.

   3. Connect the camshaft timing oil control valve connector.

CONNECT VANE PUMP ASSEMBLY

1. Connect the vane pump assembly with the 2 bolts.

   21 N*m

   214 kgf*cm

   15 ft.*lbf

2. Connect the oil pressure switch connector.

INSTALL INTAKE AIR CONNECTOR

(Click here)

INSTALL FAN AND GENERATOR V BELT

(Click here)