ВАЛ РЫЧАГА ВЫБОРА И ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ В СБОРЕ РАЗБОРКА


  1. REMOVE LEVER LOCK PIN NO.2


    1. A003FJT

      Remove the nut from the lever lock pin No.2.

    2. A003EJO

      Using a brass bar and a hammer, remove the shift lever lock pin No.2.

  2. REMOVE SELECT OUTER LEVER


    1. A003EW5

      Remove the select outer lever and washer from the select lever shaft sub-assembly.

  3. REMOVE SELECT LEVER SHAFT SUB-ASSEMBLY


    1. A003F72

      Remove the select lever shaft sub-assembly from the shift lever shaft housing.

  4. REMOVE SHIFT OUTER LEVER LOCK PIN


    1. A003I55

      Remove the nut from the shift outer lever lock pin.

    2. A003GGM

      Using a brass bar and a hammer, remove the shift outer lever lock pin.

  5. REMOVE SHIFT OUTER LEVER NO.1


    1. A003FL5

      Remove the shift outer lever No.1 from the shift and select lever shaft.

  6. REMOVE SHIFT LEVER BOOT


    1. A003BO3

      Remove the shift lever boot from the shift lever shaft housing.

  7. REMOVE SHIFT AND SELECT LEVER SHAFT


    1. A003GPD

      Using a pin punch (5 mm) and a hammer, remove the shift lever shaft set slotted spring pin.

      Note

      Be careful not to damage the shift and select lever shaft.

    2. A003ICY

      Pull out the shift and select lever shaft and remove the shift and select lever.

  8. REMOVE SELECT SPRING SEAT NO.1


    1. A003E7F

      Remove the select spring seat No.1 and spring from the shift lever shaft housing.

  9. REMOVE REVERSE RESTRICT PIN NO.1


    1. A003ATF

      Using a hammer, drive a screw extractor into the reverse restrict pin slotted spring pin.

    2. Pull out the reverse restrict pin slotted spring pin from the shift lever shaft housing.

    3. A003DUX

      Remove the reverse restrict pin No.1 and spring from the shift lever shaft housing.

  10. REMOVE SHIFT LEVER NO.2 SHAFT OIL SEAL


    1. A003F4L

      Using a screwdriver with its tip taped, remove the shift lever No.2 shaft oil seal from the shift lever shaft housing.

      Note

      Be careful not to damage shift lever shaft housing.

  11. REMOVE SHIFT LEVER SHAFT OIL SEAL


    1. A003HVK

      Using a screwdriver with its tip taped, remove the shift lever shaft oil seal from the shift lever shaft housing.

      Note

      Be careful not to damage shift lever shaft housing.