ДАТЧИК ПОЛОЖЕНИЯ ПАРКИНГА / НЕЙТРАЛИ РЕГУЛИРОВКА


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. While pushing the shift lock release button, move the shift lever to N.

    2. Remove the bolt of the park/neutral position switch assembly.

    3. Clean the bolt and bolt hole.

    4. Apply adhesive to 2 or 3 threads on the end of the bolt.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
    5. A003F5GE28
      Text in Illustration
      *a Neutral Basic Line
      *b Groove

      Align the neutral basic line with the groove as shown in the illustration.

    6. Hold the park/neutral position switch assembly in position and install the bolt.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

    7. After the adjustment, perform the park/neutral position switch assembly operation check.

      Click here