ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ УСТАНОВКА


  1. INSTALL DIESEL TURBO INLET AIR TEMPERATURE SENSOR (w/ Intercooler)


    1. Install a new gasket and the diesel turbo inlet air temperature sensor.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }
    2. Connect the diesel turbo inlet air temperature sensor connector.

  2. INSTALL ENGINE SERVICE HOLE COVER NO. 2 (w/ Intercooler)


    1. Install the engine service hole cover No.2 with the 3 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }
    2. A003CDS

      Return the carpet.

  3. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. Install the intake air temperature sensor to the air cleaner with hose.

  4. INSTALL AIR CLEANER WITH HOSE


    1. Attach the wire harness clamp and connect the intake air temperature sensor connector.

    2. Install the air cleaner with hose with the 3 bolts.

      Torque:
      18 N*m  { 178 kgf*cm, 13 ft.*lbf }
    3. Connect the air cleaner hose.

    4. Tighten the hose clamp.

  5. INSTALL NO. 1 AIR CLEANER INLET


    1. Install the No. 1 air cleaner inlet with the bolt.

      Torque:
      18 N*m  { 178 kgf*cm, 13 ft.*lbf }
  6. INSTALL HEADLIGHT ASSEMBLY RH


  7. INSTALL FRONT BUMPER