СИСТЕМА ECD ПРОЦЕДУРА ПОИСКА НЕИСПРАВНОСТЕЙ

Tech Tips

*: Use the GTS.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    NEXT

  3. CONNECT GTS TO DLC3

    Tech Tips

    If the display indicates a communication fault with the GTS, inspect the DLC3.


    NEXT

  4. CHECK DTC AND FREEZE FRAME DATA*

    Tech Tips

    Record or print DTCs and freeze frame data if necessary.


    NEXT

  5. CLEAR DTC AND FREEZE FRAME DATA*


    NEXT

  6. VISUAL INSPECTION


    NEXT

  7. CONFIRM PROBLEM SYMPTOMS

    Tech Tips

    If the engine does not start, first perform the "Check DTC" and "Basic Inspection" procedures below.

    Result
    Result Proceed to
    Malfunction occurs A
    Malfunction does not occur B

    B

    SIMULATE SYMPTOMS
    A

  8. CHECK DTC*

    Result
    Result Proceed to
    Trouble code A
    No trouble code B

    B

    Go to step 9
    A
    REFER TO DTC CHART

  9. BASIC INSPECTION

    Result
    Result Proceed to
    Malfunctioning parts not confirmed A
    Malfunctioning parts confirmed B

    B

    Go to step 11
    A

  10. REFER TO PROBLEM SYMPTOMS TABLE

    Tech Tips


    • Refer to Problem Symptoms Table Click here.

    • Also, refer to the inspection procedure for the problem symptom.


    NEXT

  11. PARTS INSPECTION


    NEXT

  12. IDENTIFY PROBLEM


    NEXT

  13. ADJUST AND/OR REPAIR


    NEXT

  14. CONFIRMATION TEST


    NEXT
    END