INSTALL CAMSHAFT POSITION SENSOR
Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
Install the camshaft position sensor with the bolt to the cylinder head cover sub-assembly.
| 10 N*m | 102 kgf*cm | 7 ft.*lbf |
When reusing the camshaft position sensor, check the O-rings.
Make sure that the O-ring is not cracked or jammed when installing it on the cylinder head cover sub-assembly.
Replace with a new part if it is dropped or if it receives a strong impact.
Connect the camshaft position sensor connector.