INNER REAR VIEW MIRROR INSPECTION


  1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY

    A003CAOE01
    Text in Illustration
    *1 Black Colored Tape - -
    *a

    Component without harness connected

    (Inner Rear View Mirror Assembly)

    		 *b Bright
    *c Dark - -

    1. Check operation of the electrochromic inner mirror.


      1. Connect the battery positive (+) lead to terminal 6 (IG) and the negative (-) lead to terminal 3 (E).

      2. Attach black colored tape to the forward sensor to prevent it from sensing.

      3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

        Tech Tips

        When the environment is very bright, the anti-glare operation may occur immediately after the tape is applied.


        • If the result is not as specified, replace the inner rear view mirror assembly.