POWER WINDOW CONTROL SYSTEM Front Passenger Side Power Window Switch Power Source Circuit

DESCRIPTION

This circuit supplies power to operate the power window switch.

WIRING DIAGRAM

A003AEBE02

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK WIRE HARNESS (POWER WINDOW SWITCH)


    1. A003EEYE02

      Disconnect the L6 (K6) connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard voltage
      LHD Models
      Tester Connection Condition Specified Condition
      K6-4 (B) - Body ground Always 10 to 14 V
      RHD Models
      Tester Connection Condition Specified Condition
      L6-4 (B) - Body ground Always 10 to 14 V

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

    PROCEED TO NEXT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE