STEERING PAD SWITCH INSTALLATION


  1. INSTALL STEERING PAD SWITCH LH


    1. Attach the 2 pins and guide to install the steering pad switch LH.

    2. Install the screw.

    3. Connect each connector.

  2. INSTALL STEERING PAD

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. CHECK SRS WARNING LIGHT

    Click here